The scanner does not scan what to do

Despite the type of device, problems can occur with each over time. However, it is necessary to know not only the causes of the problem, but also ways to solve them. Thus, in this article we will consider the situation in which the scanner ceases to fully function, as well as analyze the algorithm for resolving it.

Major mistakes

There are many wrong actions when interacting with equipment. It is they who can somehow lead to serious damage. So, below are the most common manipulations that users make:

  • Most people trust the automatic settings of the unit, however, it is not advisable to do this. Pronounced effects can be when framing an image. Some models may fail due to a misunderstanding of the image parameters.
  • In addition, guides may not be adjusted for documents. Therefore, the unit does not find the object. The mentioned category of errors may also include the location of the situation across, or else the indicators are displayed completely different.
  • Do not forget that the resolution should be set accordingly.
  • You can often notice that the owner loads too much material into one process. Most likely, this will result in a cancellation in the filing.
  • It is important to pay attention to the shade of the document. If it is really light, the scanner may not recognize the paper.

Why the matrix does not start from the scanner

You can also identify a huge number of reasons why a situation arises. In order to make out all possible options for certain, it is recommended to pay attention to the following aspects:

  • The most common case is the provision of error at the beginning of work. This can be explained by the fact that an unreliable source was originally selected directly in a special program for the scanner.
  • In addition, it may have been established very low quality. Most often, to prevent problems downloaded to the personal computer application.
  • In connection with the long-term operation of the device can accumulate a significant amount of dust, which directly affects the performance of the structure.

ATTENTION! Small particles of garbage can be located not only on the site, but also directly inside the slats of glass.

  • User often specifies invalid settings. For example, for A5 paper size, parameters were presented on A4 format.
  • The situation with the activation of the function is also possible, which is responsible for the independent elimination of the inclination.
  • The width of the document should not be overlooked. With the wrong location may fail.
  • It is important to review for the presence of foreign objects during the implementation of the functional. They can also interfere with activities.
  • It is possible that the output object is just not suitable for the procedure in the used equipment.
  • If you used the unit for a long time, the temperature inside may increase significantly, which will adversely affect the engine in the future. Thus, most likely, the device went into mode to save energy.
  • It is advisable to double-check, can you click on the tool under the name "skip blank page".

Instructions how to solve the problem if the scanner does not scan

Of course, for each case there is a certain resolution of the problem. Therefore, in case of malfunctions, it is recommended to adhere to the following actions:

  • First of all, it is desirable to reload all facilities that are involved in the activity. This is done by disconnecting them from the main power supply.
  • Further, it is important to close all available programs in the PC and also play the restart.
  • After that, you can stick the cable into the appropriate connector and start.
  • In the end, you need to double-check performance.

IMPORTANT! Pre-wipe with a soft cloth the entire structure of the possible presence of dust.

If you are left without a positive result, you will have to choose a slightly different outcome of events:

  • It is necessary to double-check the wires. For this you need to connect it to other holes. If the work is unchanged, then you can connect another usb port to the scanner. Thereby you check the functionality of the product.

It is important to note the problems in the software.

  • To do this, disconnect from the PC invention for scanning.
  • Then find and run on the computer section "programs and components."
  • After that, you need to find a special utility for the printer. It is necessary to remove it. This will certainly help you guide that will be provided from the very beginning of the process.
  • Now it will be necessary to re-activate it and re-launch the device into operation.

Watch the video: Scanner not work ? Scanner cannot communicate ? How to fix scanner Scanning problems ? (March 2024).

Leave Your Comment