Modernization of the old music center

With the advent of new equipment, old devices are no longer needed, and gradually people accumulate a lot of unused equipment. But do not throw it away, among the long-forgotten things you can find those that can still be restored and give them a second life by changing the body and the principle of operation. Today the topic for discussion will be the music center.

When upgrading old models, you can get high-quality equipment with a bright and rich sound. It is necessary to use equipment without strong external and internal damage to the case. In case of mechanical impact and breakage of microcircuits, the speakers will not be able to provide high-quality sound extraction.

If you have some free time and a desire to restore the work of the speaker system, you can do the work yourself at home. Since modern versions use a computer connection and synchronization with it, special adapters can be used to ensure this interaction. To do the job, you will need to purchase the following set of tools and parts:

  • special module for MP-3 player with the possibility of embedding in the equipment case;
  • soldering iron, flux with solder for conducting an electrical circuit and installing the module;
  • additional wires for connection to the main circuit;
  • a set of screws, screwdriver and screwdriver;
  • a sharp cutter in order to make a hole in the case - an adapter will be installed into it.

You can do without embedding the player inside the equipment, but in this case, all the wires will remain outside and will look ugly. It is recommended to put the equipment inside and then carefully close the slots in the product.

IMPORTANT! Observe safety precautions, prepare the workplace and use personal protective equipment.

In our article we will consider the most popular and affordable way to adapt the music center to modern requirements. Its essence lies in the use of a special removable unit that provides communication between the speaker and the player. Through a special built-in module, you can adjust the operation of the system, output the sound, adjust the necessary parameters.

The module itself is inexpensive, it can be purchased in specialized stores or on the manufacturer's website. After purchasing all the necessary parts and tools, it is necessary to combine the equipment and ensure their coordinated work. So you can breathe a second life into the old music center, and its classic style will successfully complement the interior of the room.

Module Features

Before you start installing the module should be familiar with the principle of its work and features. This is necessary to select the best model and select the most appropriate option for your version of the speaker system. There are simple plug-ins, and with additional features and modes of operation. The main advantages of such devices:

  • the possibility of using a special remote control system at a distance;
  • universality - suitable for any model;
  • contribute to the enhancement and improvement of the quality of the sound through the speakers from the old technology

IMPORTANT! To restore the functioning of the old music center, it is enough to keep the power supply, speakers and sound amplifier in good condition. Without these details, the device will not output sound.

Module mounting

After you have prepared all the necessary materials and tools for the work, you can proceed to the main stage. Before performing all the manipulations, free the workplace, remove unnecessary items and parts to ensure freedom of movement and safety. For convenience and understanding of the manufacturing process, we suggest using step-by-step instructions for assembling and upgrading the speaker system:

  1. Select the location where the module will be inserted. You can connect directly to the wires, but it will not look very nice.
  2. Connect the power and audio wires to the main unit circuit. It is necessary to know the circuit circuit.
  3. Make a special hole for the USB port. If there is a cassette connector in the music center, you can use it as a compartment for installation.
  4. Connect the module output to the board on the center. To do this, you need to solder the wires together.
  5. Connect the power supply. Turn on the music and test the device.

Now your device will be able to please others with beautiful sound again. To give an attractive appearance, you can close up the cuts with decorative elements.

To implement the work is quite enough basic equipment. Most of the additional features will not be needed.

Watch the video: Sons Of The Kingdom - Modernisation - Alternate Take 1978 (March 2024).

Leave Your Comment